直升机/发动机系统变旋翼转速串行优化方案

提出了一种用于直升机/涡轴发动机综合控制的变旋翼转速串行优化方案.首先基于Levenberg-Marquarat(L-M)算法/一维最优搜索算法,在保证直升机飞行状态不变的情况下,寻优得到旋翼所需最小功率,再通过优化发动机操纵量,在保证发动机约束成立的条件下得到当前发动机运行最优工作点,即达到直升机巡航时油耗最小或者涡轮前温度最低.最后,在UH-60直升机/涡轴发动机综合控制仿真平台上进行了最小油耗控制模式的仿真,数字仿真结果表明了该串行优化方案的可行性.      

A New Method for Analyzing Integrated Stealth Ability of Penetration Aircraft

Taking into account the limitations of existing stealth performance analysis methods, a method termed as the integrated stealth performance analysis method is proposed for evaluating the stealth ability of the penetration aircraft. Based on various target radar cross section (RCS) scattering characters, this article integrates the relevant parameters needed for building up target circumferential RCS scattering model and proposes the RCS scattering controlling parameters to control the changing trends of the relevant model RCS scattering characters. According to the radar dynamic detecting characters during the whole penetration course, a dynamic stealth performance evaluating model is proposed accompanied by a series of stealth ability estimation rules. This new analysis method can enhance the integrality and dependability of the stealth analysis conclusions and summarize the relationship between the target RCS scattering characters and their effects on stealth performance. The rules indicated by this relationship can be used as the reference for designing new type of stealth aircraft and setting up specific penetration tactics.     

Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.     

Process-condition-driven Automatic Location of Components

In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design (CAD) techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project “Jig Intelligent CAD (JigICAD) System”.     

LSDW速度随激光参数和环境气体压强变化规律的实验研究

对LSDW速度随入射激光能量、激光聚焦角度和环境气体压强变化的规律进行了实验研究。研究发现,入射单脉冲激光能量越大,聚焦角度越小,环境气体压强越小,LSDW的传播速度越大。实验测量得到的LS-DW速度随入射激光能量、聚焦角度和环境气体压强的变化规律与一维理论公式中体现的规律完全一致。将相同条件下的实验数据与理论结果进行比较后发现,二者在定性上取得了很好的一致性,但在定量上有所差别,因此需要对现有一维理论公式进行修正,以便更深入地研究LSDW的传播演化规律和特性。     

基于能量的飞机横侧向控制方法研究

结合偏差控制与总能量解耦思想,将总能量控制原理应用于飞机的横侧向控制,实现了滚转与偏航模态解耦及偏航角、侧滑角的无稳差控制。对某型运输机典型飞行状态进行了横侧向解耦控制律设计和仿真,仿真结果表明,基于飞机纵向总能量控制同样能用于飞机的横侧向飞行控制,较好地实现了偏航角和侧滑角的信号跟踪及滚转与偏航模态的解耦。     

碳纳米管复合材料在航空航天中的应用

文章介绍了碳纳米管技术的研究进展情况,包括合成制备、化学分子结构、独特性能及应用前景。重点介绍了碳纳米管增强复合材料的研究进展,并提出和讨论了碳纳米管复合材料在航空航天应用的一些重要研究课题。尽管碳纳米管复合材料在航空航天领域显示了非常好的发展前景,但一些关键技术仍有待深入研究。     

航天用SRAM型FPGA抗单粒子翻转设计

采用SRAM工艺的FPGA因其性能优异,在空间领域的应用受到重视;但是在空间环境中,SRAM型FPGA易受单粒子翻转的影响而导致逻辑故障或功能中断。文章提出对该类芯片的配置逻辑部分采用回读比较后刷新、对其BRAM部分采用通用自纠错宏的抗单粒子翻转（SEU）设计方案,在牺牲一定的器件性能的情况下,能达到较好的抗辐射效果。     

基于轨道参数和SAR回波数据的多普勒调频率快速估计

多普勒调频率是SAR方位向压缩的关键参数之一. 调频率的失配会带来严重的方位向散焦, 从而影响成像质量. 基于减灾、防灾目的, 需要对SAR数据快速成像, 从而相应要求对多普勒调频率进行快速估计处理. 根据多普勒调频率快速估计需求, 提出了一种基于轨道参数法和Map Drift算法估计多普勒调频率的综合反演算法, 利用多普勒调频率与距离的关系, 简化整个估计流程, 从而提高估计速度. 同时给出了一种块数据筛选的方法, 用于选择综合反演法中所采用的块数据. 实验结果表明, 综合反演法能够在满足成像质量要求的基础上, 快速估计出多普勒调频率.